Comparison

REAP and AIOps

AIOps groups and ranks events across tools so the on-call engineer sees fewer, better alarms. REAP runs the investigation that follows: it decides what evidence to gather next, links each conclusion to that evidence and checks changes before and after. AIOps output can be one of its inputs. This page is for the colleague who asked whether you need both.

The short answer

Correlation ends where the investigation begins

AIOps does a real job. It takes the event streams from monitoring, logs and the ITSM, suppresses the duplicates, groups the related events and ranks the result, so that one incident arrives as one alarm instead of forty. Teams that run it well have calmer on-call rotations and faster restoration, and nothing about REAP asks them to give that up.

What correlation cannot do is gather new evidence. It works on the events it was given; it does not run a command, compare a configuration to last Tuesday’s, trace the path through the firewall or ask what the change ticket said. That is the investigation, and it starts where the correlated alarm ends. REAP runs it: hypotheses, evidence, next steps, and a conclusion traceable to the command output, the diff and the ticket text. Then it does the part no event stream contains at all: it checks a change before it runs and proves it afterwards, and it proves that failover will hold before anything fails.

Which is why the honest description is not a choice between them. A correlated alarm can be one of REAP’s inputs; REAP’s finding goes back to the ticket the alarm opened.

Side by side

What each answers, needs and stops at

The rows follow an incident from the first event to the postmortem.

StageAIOpsREAP
The first eventsCollects, deduplicates and groups them; ranks the result by its rules and its models.Raises qualified incidents from the telemetry it collects, each opened with a first analysis; incidents your monitoring raises reach it through ServiceNow (opens in a new tab) or Jira (opens in a new tab). Correlation and prioritization of third-party alert streams is in development.
The alarmOne incident, fewer pages, a probable cause from the pattern of events.The start of an investigation: what changed, why it broke, what is affected, with the evidence gathered rather than inferred.
The evidenceThe events it was given, with their timestamps.Command output, configuration diffs, path traces, ticket text and the device state it reads itself, each linked from the conclusion it supports.
The change behind itA change event, if the change system emitted one.The change record, the configuration history and the unrecorded change found by drift detection, compared before and after.
The fixA runbook link or an automation trigger, where configured.A recommendation with its evidence; a runbook that runs only under approval, behind a confirmation, logged with the device output.
The proofThe alarm cleared.A verdict written to the change record; the Investigation Window kept for the postmortem and the auditor.

Keeping both

How AIOps and REAP fit in one operation

  1. AIOps keeps the alarm volume down

    Its correlated incidents open in the ITSM as they do today. Nothing changes in the on-call rotation on day one.

  2. REAP picks up the incident from the ticket

    Through ServiceNow (opens in a new tab) or Jira (opens in a new tab) today; direct correlation of third-party alert streams is in development. The investigation starts from the ticket, not from the raw events.

  3. The finding returns to the same ticket

    What changed, why it broke, what is affected and what to do next, with the evidence linked, where the on-call engineer and the postmortem will look for it.

  4. Changes and failover get their own loop

    Change impact analysis before a window, a verdict after it, and failover-readiness findings, none of which an event stream carries.

Questions

AIOps and REAP: straight answers

We just bought an AIOps platform. Is REAP redundant?

No, because the two do different work: correlation on one side, investigation and verification on the other. If the platform has cut your alarm volume but your mean time to an understood root cause has not moved, that is the gap REAP is built for; the operations baseline will show you the number.

Can REAP read our AIOps platform’s output directly?

Today the incidents it raises reach REAP through ServiceNow (opens in a new tab) or Jira (opens in a new tab). Correlation and prioritization of third-party alert streams is in development; the product-status page says when it changes.

Is REAP an AIOps platform for networks?

No. REAP is the agentic AI platform for network operations: the reasoning and assurance layer above monitoring, AIOps, the ITSM and the network platforms. The category guide draws the line in detail.

What does REAP collect itself?

SNMP, syslog, CLI, gNMI (opens in a new tab) and flow records where configured, through a connector cluster inside your network, with no payload inspection and no continuous packet capture. From that telemetry its own deterministic rules raise qualified incidents today.

Bring us the incident your alarms were right about and nobody could explain.

Then see how REAP connects network evidence, from the ticket outward, to help engineers investigate incidents faster: a 30-minute session, evidence first.